Why autofocus is not working on my Sony Camcorder?
If the autofocus on your Sony Camcorder isn't working, check if FOCUS is set to MANUAL; if so, set it to AUTO. Alternatively, the shooting conditions might not be suitable for autofocus. In this case, manually set the focus.
How to fix a blurry viewfinder on Sony Digital 8 DCR-TRV120 Camcorder?
If the image on the viewfinder screen of your Sony Camcorder is not clear, the viewfinder lens may need adjustment. Adjust the viewfinder lens.
What to do if START/STOP button on my Sony Digital 8 DCR-TRV120 doesn't work?
If the START/STOP button on your Sony Camcorder isn't working, there could be several reasons. First, ensure the power is set to CAMERA. If the tape has run out, rewind it or insert a new one. Check the write-protect tab; if it exposes a red mark, use a new tape or slide the tab. If moisture condensation has occurred, remove the cassette and let the camcorder acclimatize for at least an hour. Lastly, if the camcorder has been in standby mode in CAMERA mode for over 3 minutes, set the POWER switch to OFF (CHARGE) and then back to CAMERA.
How to fix too bright picture on Sony Camcorder?
If the picture appears too bright on your Sony Camcorder, and the subject is not visible on the LCD screen or in the viewfinder, NIGHTSHOT might be enabled. Set NIGHTSHOT to OFF. If NIGHTSHOT is on in a bright place, set it to OFF or only use the NightShot function in a dark place.
Why SteadyShot is not working on my Sony Digital 8 DCR-TRV120 Camcorder?
If the SteadyShot function isn't working on your Sony Camcorder, check if STEADYSHOT is set to OFF in the menu settings. If it is, set it to ON.
What to do if my Sony Digital 8 DCR-TRV120 displays an unknown picture?
If your Sony Camcorder displays an unknown picture on the LCD screen or in the viewfinder, it might be due to the demonstration mode. If 10 minutes elapse after setting the POWER switch to CAMERA, or if DEMO MODE is set to ON without a cassette inserted, the camcorder automatically starts the demonstration. Insert a cassette to stop the demonstration, or cancel DEMO MODE.
Why the fader function is not working on my Sony Camcorder?
If the fader function is not working on your Sony Camcorder, the digital effect function may be active. Cancel the digital effect function.
Why can't I record in LP mode on my Sony Digital 8 DCR-TRV120 Camcorder?
If you cannot record in LP mode on your Sony Camcorder, the tape may be a standard 8 tape. Use Hi8/Digital8 tapes instead.
Why does a horizontal black band appear on my Sony Digital 8 DCR-TRV120 when filming a screen?
General| Recording Format | Digital 8 |
|---|---|
| Optical Zoom | 20x |
| LCD Screen Size | 2.5 inches |
| Viewfinder | Color |
| Image Stabilization | Electronic |
| Shutter Speed | 1/4 - 1/4000 sec |
| Microphone | Built-in |
| Image Sensor | CCD |
| Video Resolution | 720 x 480 |
| Focus Adjustment | Auto, Manual |
| Exposure Control | Auto, Manual |
| White Balance | Auto |
| Audio Recording | Stereo |
| Connector Type | S-Video |
| Camcorder Media Type | 8mm tape, Hi8 tape, Digital8 tape |
| Battery Life | Up to 2 hours (with optional battery) |
Initial setup for camcorder operation, including power connection and cassette loading.
First steps to record video and monitor playback on the LCD screen.
Guidance on reading the manual and checking included accessories.
Detailed setup for power supply and tape loading.
Fundamental steps to record video and control zoom.
Using Backlight, NightShot, Self-timer, and AE modes.
Tape Photo, digital effects, titles, and scene insertion.
Playing tapes and connecting the camcorder to a TV.
Effects playback, PB ZOOM, and scene searching.
Copying video and recording TV broadcasts.
Handling, insertion, and quality settings for Memory Stick.
Recording and viewing still images on Memory Stick.
Protecting and deleting images on Memory Stick.
Adjusting camcorder settings via the menu system and clock.
Solutions for problems and understanding indicators.
Labeled diagrams and function summaries.
To Next Page