Why doesn't the remote commander function with my Sony DSC-1024HD Media Converter?
If the remote commander isn't working with your Sony Media Converter, check the type of your remote commander and set the COMMAND MODE selector correctly. Also, disconnect the plug from the CTRL S IN jack.
What to do if there is no picture on my Sony DSC-1024HD Media Converter?
If there's no picture on your Sony Media Converter, first check if the ON/OFF switch indicator is lit. Ensure the power cord is connected and the ON/OFF switch is pressed. Verify your monitor/projector is on and that the corresponding OUT indicator is lit. Use built-in test patterns to confirm secure connections and check that you've pressed the correct INPUT SELECT button. Also, confirm the input source equipment is on, playing, and correctly connected, ensuring one of the IN indicators is lit. Finally, if using VIDEO 3 IN, set the SYNC AUTO/ON G selector to AUTO; for VIDEO 2 IN, ensure the NORMAL/COMP selector is correctly positioned.
Why is the POWER indicator flashing on my Sony Media Converter?
The POWER indicator on your Sony Media Converter might be flashing because the built-in thermal protector has activated due to a high surrounding temperature. Ensure the surrounding temperature is not too high. Turn the unit off and on using the POWER switch. If the POWER indicator continues to flash, or if the fan isn't working after turning it back on, you should consult your dealer.
General| Brand | Sony |
|---|---|
| Model | DSC-1024HD |
| Category | Media Converter |
| Language | English |
To Next Page
