Sony DSC-HX400 User Manual

Allows you to shoot fast-moving subjects etc., by manually adjusting the shutter speed.
M (Manual Exposure):
Allows you to shoot still images with the desired exposure by adjusting the shutter speed and
the aperture value.
1/2 (Memory recall):
Allows you to shoot an image after recalling often-used modes or numeric settings registered in
advance.
(Movie):
Allows you to change the setting for movie recording.
(iSweep Panorama):
Allows you to shoot a panoramic image by compositing the images.
SCN (Scene Selection):
Allows you to shoot with preset settings according to the scene.
[13] How to Use Shooting Selecting a shooting mode
Intelligent Auto
The product analyzes the subject, and allows you to shoot with appropriate settings.
1. Set the mode dial to (Intelligent Auto).
2. Point the camera to the subject.
When the camera recognized the scene, the icon for the recognized scene appears on the
screen.
3. Adjust the focus and shoot the image.
Note
The product will not recognize the scene when you shoot images with zoom functions other
than optical zoom.
The product may not properly recognize these scenes under some shooting conditions.

Sony DSC-HX400 Specifications

General

Sensor Type	CMOS
Effective Pixels	20.4 MP
Optical Zoom	50x
Lens Type	Carl Zeiss Vario-Sonnar T*
Focal Length	4.3-215 mm
Display Type	TFT LCD
LCD Screen Resolution	921, 600 dots
Image Stabilization	Optical SteadyShot
Connectivity	Wi-Fi, NFC
Camera Type	Bridge Camera
Sensor Size	1/2.3 inch
Weight	660 g (including battery and memory card)
Dimensions	129.6 x 93.2 x 103.2 mm
Battery Type	NP-BX1
ISO Sensitivity	80-3200 (expandable to 12800)
Video Resolution	1920 x 1080 (60i/30p/24p)