Sony DSC-RX100M4 - Monitor Brightness; Viewfinder Bright

Help Guide
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4573718122.w/en/print.html[10/27/2015 5:43:01 PM]
5. MENU → (Setup) → [HDMI Settings] → [CTRL FOR HDMI] → [On].
6. Press the SYNC MENU button on the TV remote control, and select the desired mode.
Note
If the product is not in playback mode, press the (Playback) button.
Only TVs that support “BRAVIA” Sync can provide SYNC MENU operations. For details,
refer to the operating instructions supplied with the TV.
If the product performs unwanted operations in response to the TV remote control when
the product is connected to another manufacturer’s TV using an HDMI connection, select
MENU → (Setup) → [HDMI Settings] → [CTRL FOR HDMI] → [Off].
[169] How to Use
Changing settings Setup menu
Monitor Brightness
You can adjust the brightness of the screen.
1. MENU → (Setup) → [Monitor Brightness] → desired setting.
Menu item details
Manual:
Adjusts the brightness within the range of –2 to +2.
Sunny Weather:
Sets the brightness appropriately for shooting outdoors.
Note
The [Sunny Weather] setting is too bright for shooting indoors. Set [Monitor Brightness] to
[Manual] for indoor shooting.
The monitor brightness cannot be adjusted in the following situations. The maximum
brightness will be [±0].
[ File Format] is [XAVC S 4K].
[
File Format] is [XAVC S HD] and the [ Record Setting] is [120p]/[100p].
The monitor brightness is locked at [-2] when using Wi-Fi functions.
[170] How to Use
Changing settings Setup menu
Viewfinder Bright.