Hint
Once the QR Code has been read, this product's SSID (DIRECT-xxxx) and password are registered to the smartphone. This
enables you to easily connect the smartphone to the product via Wi-Fi at a later date by selecting the SSID. (Set [Ctrl w/
Smartphone] to [On] in advance.)
Note
When you record movies using a smartphone as a remote controller, the monitor of the product becomes darker.
If you cannot connect your smartphone to this product using the [One-touch(NFC)] function or QR Code, use the SSID and
password.
Related Topic
PlayMemories Mobile
Controlling the camera using an Android smartphone (SSID)
4-740-381-11(1) Copyright 2018 Sony Corporation
Once the QR Code has been read, a message [Connect with the camera?] will be displayed on the smartphone
screen.
Select [OK] on the smartphone screen.
The smartphone is connected to the product.
You can now shoot images remotely while checking the composition on the smartphone screen.
5
To Next Page
Loading...
