Help Guide
Digital Still Camera
DSC-RX100M5A
View on TV
You can view images on a network-enabled TV by transferring them from the product without connecting the product and
TV with a cable. For some TVs, you may need to perform operations on the TV. For details, refer to the operating
instructions supplied with the TV.
Slideshow settings
You can change the slideshow settings by pressing the down side of the control wheel.
Playback Selection:
Selects the group of images to be shown.
Folder View(Still):
Selects from [All] and [All in Folder].
Date View:
Selects from [All] and [All in Date Rng.].
Interval:
Selects from [Short] and [Long].
Effects*:
Selects from [On] and [Off].
Playback Image Size:
Selects from [HD] and [4K].
Note
You can use this function on a TV that supports DLNA renderer.
You can view images on a Wi-Fi Direct-enabled TV or network-enabled TV (including wired network-enabled TVs).
If you connect TV and this product and do not use Wi-Fi Direct, you need to register your access point first.
Displaying the images on the TV may take time.
Movies cannot be shown on a TV via Wi-Fi. Use an HDMI cable (sold separately).
MENU →
(Network) → [View on TV] → desired device to be connected.
1
When you want to play back images using slideshow, press the center of the control wheel.
To display the next/previous image manually, press the right/left sides of the control wheel.
To change the device to be connected, press the down side of the control wheel, then select [Device list].
2
The settings are effective only for BRAVIA TV which is compatible with the functions.
*
To Next Page
Loading...
