2-6
DSC-WX1_L2
2-3. ORNAMENTAL RING A OR BARRIER ASSY REPLACING METHOD
3 Peel off release papers of Barrier Tapes.
4 Install Ornamental Ring A and press it lightly.
Installation
1 Affix two Barrier Tapes to Barrier Assy.
Note: The tape must not be wrinkled.
2 With four claws fitted in position, install the Barrier Assy.
5 Remove Barrier Assy by disengaging four claws.
Ornamental Ring A
Ornamental Ring A
Barrier Assy
Barrier Assy
Barrier Tapes
Barrier Tape
Barrier Tape
A
Removal
1 Turn on the power switch and extend the lens.
2 Detach the battery.
3 Pour a solvent such as alcohol from two places A to the tweezers or a needle shown below into a gap of Ornamental Ring A.
4 Remove while turning the Ornamental Ring A right and left.
Solvent
Claws
Claws
Tweezers
Barrier Assy
Barrier Lever
Hole
Claws
Claws
To Next Page
Loading...
