4
GB
The indication on the EV scale
If you set the exposure to over +3.0 EV or under –3.0 EV, the indication on the LCD
monitor (recording information display) or viewfinder is as follows:
Example
Display of a modified image when the intelligent preview is
working
If you set the exposure to over +3.0 EV or under –3.0 EV after an image is displayed on
the LCD screen in intelligent preview, you cannot check the effect on a modified image.
If you upgrade the camera, a setting is added to the continuous bracket and single bracket
shooting functions: The exposure is shifted by 3.0 EV and the camera shoots three
images. [3.0EV3] is indicated when this is selected. For details on bracket shooting, refer
to “Shooting with Exposure bracket” in the “Instruction Manual.”
The supplied “Remote Camera Control” software
You cannot set [3.0EV3] from “Remote Camera Control,” however, you can set it from
the camera. In this case, “Drive mode” is indicated as “As per camera” on “Remote
Camera Control.”
When the compensation value is
between –3.3 EV and –5.0 EV
When the compensation value is
between +3.3 EV and +5.0 EV
LCD monitor
The exposure value is indicated.
The b arrow appears or flashes.
The exposure value is indicated.
The B arrow appears or flashes.
Viewfinder
The b arrow appears or flashes. The B arrow appears or flashes.
Adding a bracket step to the bracket shooting
function
Continued r
To Next Page
Loading...
