20GB
OVERLOAD
USB device is overloaded.
Disconnect the USB device, then change
the source by pressing OFF.
Indicates that the USB device is out of
order, or an unsupported device is
connected.
READ
The unit is reading all track and album
information on the USB device.
Wait until reading is complete and
playback starts automatically. Depending
on the USB device structure, it may take
more than a minute.
STOP
When repeat play is not set, playback of the
last track in album finished.
The music application in the iPod/iPhone is
terminated.
Press PAUSE to start playback again.
If these solutions do not help improve the
situation, consult your nearest Sony dealer.
To Next Page
Loading...
