Do you have a question about the Sony EVI-H100S and is the answer not in the manual?
Full HD | Yes |
---|---|
Supported video modes | 720p, 1080i, 1080p |
Analog signal format system | NTSC, PAL |
Pan range | -170 - 170 ° |
Pan speed | 100 °/sec |
White balance | Auto, Indoor, Manual, Outdoor |
Tilt angle range | -20 - 90 ° |
Camera shutter speed | 1 - 1/10000 s |
Minimum illumination | 0.5 lx |
Sensor type | CMOS |
Optical sensor size | 1/2.8 \ |
Digital zoom | 12 x |
Optical zoom | 20 x |
Focal length range | 4.7 - 94 mm |
Maximum aperture number | 3.5 |
Built-in HDD | No |
Type | CCTV security camera |
Placement supported | Indoor |
Light exposure modes | Auto, Manual, Shutter priority AE |
Connectivity technology | Wired |
Form factor | Dome |
Mounting type | Desk/Ceiling |
Product color | White |
LED indicators | Power, Stand-by |
Signal-to-Noise Ratio (SNR) | 50 dB |
Power consumption (typical) | 12 W |
Storage temperature (T-T) | -20 - 60 °C |
Operating temperature (T-T) | 0 - 40 °C |
Interface | RS-232C |
RS-422 ports | 1 |
Cables included | AC |
Depth | 164 mm |
---|---|
Width | 145 mm |
Weight | 1550 g |
Provides a general description of the camera's main operational features and settings.
Stores and recalls up to 6 sets of camera shooting conditions for instant desired status.
Lists commands available in different modes (Power On, IFC, Initializing, During Menu Display).
Explains the VISCA protocol, its controller/peripheral device concept, and RS-232C parameters.
Details ACK, Completion, and Error messages returned by the camera.
Covers address setting and network change notifications for VISCA devices.
Reference table for optical and digital zoom ratios and position data.
Details the status of LED indicators for power, standby, and errors.
Instructions on how to switch the D70 mode ON or OFF using the bottom switch.
Details system information including video signal, synchronization, image device, and lens.
Lists all input and output connectors for video and control signals.