Sony FCB-ER8550 - Page 22

FCB-ER8550/CR8550(GB) D-201-100-12(1)
22
UART update-error 4
Update Procedure (USB)
The update (USB) error patterns are as follows.
Fatal error
FCB
Reboot
Reboot
ready
Error
VISCA
HOST
VISCA
xmodem
H/W RePower
updater mode
updater mode
fatal error
erroroccurs
Reboot
Startinthe
applicationmode.
CMD_GET_STATE
ERR_XXXX
(Refer to the command specification.)
ERR_XXXX
(Refer to the command specification.)
ERR_XXXX
(Refer to the command specification.)
CMD_COMPLETE
HOST FCB
Startagain
fromthebeginning.
CMD_GET_STATE
CMD_COMPLETE CMD_COMPLETE
HOST FCB
Versionupgrade
iscompleted.
CMD_GET_STATE
HOST FCB
Reboot Reboot