What to do if Sony FDR-X3000 Camcorder says access point has been found but is not connected?
If your Sony Camcorder indicates that an access point has been found but is not connected, check the password for the access point and try connecting again.
What to do if Sony FDR-X3000 says access point cannot be found?
If your Sony Camcorder cannot find the access point, confirm the settings of the access point using 'Camera Settings for Live Streaming' of the Action Cam Movie Creator’s camera settings.
Why does my Sony FDR-X3000 say the battery is not inserted?
If your Sony Camcorder displays a message indicating that the battery necessary for shooting is not inserted, insert the charged battery.
What to do if my Sony Camcorder says the memory card does not support XAVC S 100 Mbps movie recording?
If your Sony Camcorder shows a message that the memory card does not support XAVC S 100 Mbps movie recording, use a microSDXC memory card of Class 10 or higher when shooting in XAVC S format. Alternatively, use a memory card that supports UHS-I U3 standard when you are shooting in XAVC S 100 Mbps.
What to do if my Sony Camcorder says the total time of saved video on Ustream has reached the limit?
If your Sony Camcorder indicates that the total time of saved video on Ustream has reached the limit, stop streaming video.
What to do if my Sony FDR-X3000 Camcorder says the channel set by “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings is incorrect?
If your Sony Camcorder indicates that the channel set by “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings is incorrect, this message also displays if other media starts streaming on the same channel while streaming from the camera is performed. Set the channel again.
What to do if my Sony FDR-X3000 says the saving settings of video cannot be saved to Ustream because an error has occurred on the network?
If your Sony Camcorder indicates that the saving settings of video cannot be saved to Ustream because an error has occurred on the network, and some other network error has occurred, confirm the setting of the access point or the security of the access point using “Camera Settings for Live Streaming” of the Action Cam Movie Creator’s camera settings.
What to do if my Sony FDR-X3000 Camcorder says an unknown error has occurred on Ustream, when using the Live Streaming function?
If your Sony Camcorder indicates that an unknown error has occurred on Ustream, when using the Live Streaming function, wait a moment and then try confirming the connection again.
Why Sony FDR-X3000 Camcorder says unable to record images because the camera temperature has risen?
If your Sony Camcorder is unable to record images because the camera temperature has risen, this could be due to several reasons: - The camera temperature has risen. The power may turn off automatically, or you may be unable to record images. Leave the camera in a cool location until the temperature goes down. - If you record images for an extended period, the camera temperature rises. In this case, stop recording images.
General| 3D | No |
|---|---|
| Video resolutions | 800 x 480, 1280 x 720, 1920 x 1080, 3840 x 2160 pixels |
| Maximum frame rate | 120 fps |
| Maximum video resolution | 3840 x 2160 pixels |
| Photo mode | Yes |
| Sensor type | CMOS |
| Total megapixels | 8.2 MP |
| Optical sensor size | 1/2.5 \ |
| Maximum image resolution | 4608 x 2592 pixels |
| Flip-out screen | - |
| Storage media | Memory card |
| Compatible memory cards | MS Micro (M2), MicroSD (TransFlash), microSDHC, microSDXC |
| USB connector type | Micro-USB |
| Micro HDMI ports quantity | 1 |
| White balance | Auto, Custom modes |
| Fastest camera shutter speed | 1/10000 s |
| Product color | White |
| Battery voltage | 3.6 V |
| Battery life (max) | - h |
Weight and Dimensions| Depth | 83 mm |
|---|---|
| Width | 29.4 mm |
| Height | 47 mm |
| Weight | 114 g |
To Next Page
