To Next PageTo Next Page
Need help?Do you have a question about the Sony FE 24-105mm F4 G OSS and is the answer not in the manual?
General| Lens type | Standard zoom lens |
|---|---|
| Component for | MILC/SLR |
| Focus adjustment | Manual |
| Image stabilizer | - |
| Fixed focal length | 35 mm |
| Focal length range | 24 - 105 mm |
| Aperture range (F-F) | 4 - 22 |
| Lens mount interface | Sony E |
| Maximum aperture number | 4 |
| Minimum aperture number | 22 |
| Closest focusing distance | 0.38 m |
| Number of diaphragm blades | 9 |
| Lens structure (elements/groups) | 14/17 |
| Focal length (35mm film equivalent) | 36 - 157.5 mm |
| Maximum focal length (35mm film equiv) | 157.5 mm |
| Minimum focal length (35mm film equiv) | 36 mm |
| Maximum magnification | 0.31 x |
| Camera brands compatibility | Sony |
| Product color | Black |
| Lens cap included | Yes |
Weight and Dimensions| Length | 113.3 mm |
|---|---|
| Weight | 663 g |
| Diameter | 83.4 mm |
| Extended length | 77 mm |
Precautions for handling volatile chemicals used in servicing.
Guidelines for cleaning and installing exterior parts carefully.
Handling unleaded solder and soldering iron temperature.
Post-repair checks to ensure safe operation.
Warning about replacing safety-critical components with specified parts.
General guidelines for handling flexible boards and connectors.
List of specific adhesives and greases required for service.
Exploded view and part identification for the front section.
Exploded view and part identification for the mirror tube section.
Exploded view and part identification for the rear mount section.
Outlines the step-by-step process for disassembling the lens.
Procedure for removing the front ring of the lens.
Steps to remove the filter screw barrel.
Procedure for disassembling the 1st group assembly.
Steps to remove the zoom ring rubber.
Procedure for disassembling the mount assembly.
Procedure for disassembling the CL-1058 board block.
Procedure for disassembling the rear barrel block.
Procedure for disassembling the appearance assembly.
Procedure for disassembling the zoom ring assembly.
Steps for removing the focus ring rubber.
Procedure for disassembling the focus ring.
Procedure for disassembling the outer block assembly.
Procedure for disassembling the ZMR assembly.
Procedure for disassembling the 1st moving frame assembly.
Procedure for disassembling the 3-5th group block.
Procedure for disassembling the 2nd lens barrel assembly.
Outlines the sequence for reassembling the lens assembly.
Step-by-step guide for assembling the 2nd lens barrel assembly.
Step-by-step guide for assembling the 3-5th group block.
Step-by-step guide for assembling the 1st moving frame assembly.
Step-by-step guide for assembling the ZMR assembly.
Step-by-step guide for assembling the outer block assembly.
Step-by-step guide for assembling the focus ring.
Procedure for assembling the focus ring key.
Procedure for assembling the focus ring rubber.
Step-by-step guide for assembling the zoom ring assembly.
Step-by-step guide for assembling the appearance assembly.
Procedure for assembling the zoom linkage pin.
Procedure for assembling the G17 mask block assembly.
Step-by-step guide for assembling the rear barrel assembly.
Procedure for assembling the CL-1058 board.
Procedure for assembling the CL-1058 board block.
Procedure for assembling the BL contact assembly.
Procedure for assembling the mount assembly.
Procedure for assembling the zoom ring rubber.
Procedure for assembling the 1st group assembly.
Procedure for assembling the filter screw barrel.
Procedure for assembling the front ring.
Illustrated breakdown of parts for the front section.
Illustrated breakdown of parts for the mount section.
Illustrated breakdown of parts for the outer barrel section.
Illustrated breakdown of parts for the cam barrel section.
Guides for selecting back adjustment washers by thickness.
Guides for selecting adjustment shims by thickness.
List of included instruction manuals in various languages.
List and images of accessories like lens caps, hood, and case.
Guidelines before starting adjustments and items affected by part replacement.
Table detailing adjustment/check items after part replacement.
Visual flowchart of the adjustment and check procedures.
Setup for flange back measuring instruments and cameras.
Methods for checking optical axis alignment (AS/CB values).
Methods for adjusting optical axis alignment using adjuster pin.
Guide for installing and using the E-Mount Lens Adjustment software.
Steps for starting, finishing, and operating the BLG-TestProgram.
Procedure and reference values for checking projective resolving power.
Procedure for checking photographic resolving power using charts.
Adjusting partial blur and curvature using washers or shims.
Preparation of equipment, software installation, and usage precautions.
Detailed procedures for Lens Device, Flange Back, F Number, and Focus Shift adjustments.
Method for checking the lens sleep function.
