Cine EI: Loading Custom LUTs
You can load your own LUTs into the camera.
The LUTS must be 3D .cube LUTs: 17x or preferably 33x cube LUT’s designed for use with S-Log3
and SGamut3.cine. It is even better if they are designed for use with the FX6.
Put the LUTS in the location shown below on the media card in Slot B of the camera.
You may have to format Media Card B first. A quick format is fine. This erases all files!
Format the card and then import the custom LUT into this
location on card B:
To Next Page
