Frame Rates: Frequency/Scan
The camera calls standard frame rates frequency/scan.
For 4K UHD or HD pick one of the two NTSC frame rates: 23.98p and 29.97p.
With large sensor CMOS cameras like the FX6, motion looks better when shooting at 29.97p.
29.97p also looks better on (NTSC) TVs, computer screens and data projectors.
23.98p is useful is you need more light (because the shutter speed is slower).
For 4K DCI pick: 24p
When in PAL nations pick: 25p
I consider 59.94p a high NTSC frame rate. I only shoot this as a special effect. You can pick it as a S & Q
rate as well. The same thing applies for 50p for our PAL friends. Some people like to use these frame
rates for sports/action. They are broadcast standards so they are included with the standard rates.
S & Q frame rates are covered in another section of this guide. These are frame rates higher or lower
than the standards. S &Q frame rates 4K: 1 to 120 fps, HD: 1 to 240 fps
To Next Page
Loading...
