30
1 Open the LCD panel.
2 Insert the "Memory Stick Duo"
into the "Memory Stick Duo" slot
in
the right direction until
it
clicks.
Access lamp
("Memory Stick Duo")
To
eject
a
"Memory
Stick
Duo"
Lightly push the "Memory Stick Duo" in
once.
" Notes
• When the access lamp
is
lit or flashing, your
camcorder
is
reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the "Memory Stick Duo," or remove the
battery pack. Otherwise, image data may be
damaged.
• If you insert the "Memory Stick Duo" into the
slot in the wrong direction, the "Memory Stick
Duo," the "Memory Stick Duo" slot, or image
data may be damaged.
• When inserting or ejecting the "Memory Stick
Duo," be careful with the "Memory Stick Duo"
from popping out and dropping.
To Next Page
Loading...
Need help?
Imaging
Audio
Display
Power
