102
Recording images continuously
You can record still pictures continuously. Select one of the two modes described below
before recording.
Continuous mode [a] (DCR-TRV20 only)
When the image size is set to 1152 × 864, you can record up to four pictures
continuously.
When the image size is set to 640 × 480, you can record up to 16 pictures continuously.
The number of recorded photos in continuous mode depends on the capacity of the
“Memory Stick.”
Multi screen mode (Recording image size is 640 × 480) [b]
You can record nine still pictures continuously on a single page.
While pressing down PHOTO, your camcorder continuously record maximum number
of still pictures depending on the image size.
When you stop pressing, the recording stops.
(1) Set the POWER switch to MEMORY. Make sure that the LOCK switch is set to
the left (unlock) position.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select CONTINUOUS, then press the dial.
(5)
Turn the SEL/PUSH EXEC dial to select the desired setting, then press the dial.
[a] [b]
Recording still images on “Memory Stick”s – Memory photo
recording
To Next Page
Loading...
Need help?
General