Sony Handycam Video8 CCD-FXT30V User Manual

~— COD-FXT30V
RIVIT-708
SERVICE MANUAL US Model
Canadian Model
E Model
Video8
Handycam
| A MECHANISM |
For MECHANISM ADJUSTMENTS, refer to the
“8 mm Video MECHANICAL ADJUSTMENT
MANUAL Iv” (9-973-199-11).
Differences Manual
¢ CCD-FX730V is based on model CCD-FX430 (CCD-FX430/FX435/FX530/FX630 SERVICE MANUAL).
(Main differences)
1. LCD screen addition (SD-14, PD-53 boards addition).
2. Speaker addition.
3. REC switch addition on control switch block (FK).
4. FADER switch addition on control switch block (CK).
5. Boards are changed.
VvC-143 A-7063-949-A VC-151 A-7066-155-A
VS-110 A-7063-944-A VS-119 A-7066-156-A
(US, Canadian)
A-7066-210-A (E)
The printed wiring board and schematic diagram for the AU-175 board and MA-209 board are not
shown because basically they are identical to the CCD-FX430’s AU-157 board and MA-197 board.
e In this service manual, only the differences from CCD-FX430 is mentioned.
When servicing, see the CCD-FX430/FX435/FX530/FX630 service manual (9-973-530-11) with this.
FE] VIDEO CAMERA RECORDER
SONTY.

Sony Handycam Video8 CCD-FXT30V Specifications

General

Brand	Sony
Model	Handycam Video8 CCD-FXT30V
Category	Camcorder
Language	English

Summary

General Camcorder Operations

Basic Camera Recording Operations

Basic operations for recording video footage with the camcorder.

Camcorder Maintenance and Precautions

Guidelines for maintaining the camcorder and preventing damage.

Disassembly Procedures

Cabinet (R) Assembly Removal

Steps for removing the right side cabinet assembly of the camcorder.

Control Switch Block (CK) Removal

Procedure for removing the control switch block (CK) from the camcorder.

Panel Block Assembly Removal

Steps for removing the panel block assembly of the camcorder.

LCD Module and PD-53 Board Removal

Procedure for removing the LCD module and PD-53 board.

Repair Parts List

Electrical Components List

Comprehensive list of electrical components, part numbers, and descriptions.

Adjustments and Calibration

Camera Section Calibration

Procedures for adjusting the camera section of the camcorder.

Video Section Adjustments

Procedures for adjusting the video section of the camcorder.

Video Adjustments (Comb Filter)

Specific video adjustment procedures, including Comb Filter.

LCD System Calibration

Procedures for adjusting the LCD system and backlight.

PD-53 Board: Power Supply Voltage Check

How to check and verify power supply voltages on the PD-53 board.

PD-53 Board: PNL-8V Adjustment

Procedure for adjusting the PNL-8V voltage on the PD-53 board.

EVR Initial Data Input Procedure

PD-53 Board: Brightness Adjustment

PD-53 Board: VCO Frequency Adjustment

PD-53 Board: Horizontal Display Position Adjustment

PD-53 Board: Contrast Adjustment

V COM Adjustment Procedure

PD-53 Board: White Balance Preset Adjustment (1)

PD-53 Board: White Balance Preset Adjustment (2)

White Balance Calibration