EasyManuals Logo

Sony HAP-S1 Quick Start Guide

Sony HAP-S1
19 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
1
Connect the unit to speakers
Connectez l’appareil aux enceintes
2
Connect the unit and computer to the same network
Connectez l’appareil et l’ordinateur au même réseau
After connecting the unit and speakers,
connect the AC power cord (mains lead) to a
wall outlet (wall socket).
Après avoir connecté l’appareil et les enceintes,
connectez le cordon d’alimentation secteur à
une prise murale.
Speakers,
speaker cables
(not supplied)
Enceintes,
câbles d’enceinte
(non fournis)
Rotate the knob to select an item,
and press to enter.
Tournez le bouton pour
sélectionner un élément, puis
appuyez pour confirmer.
Turn on the power of the unit, and then set up the unit following the on-screen
instructions.
You can connect the unit to the network using either a wireless or wired LAN connection.
Mettez l’appareil sous tension, puis configurez-le en suivant les instructions à l’écran.
Vous pouvez connecter l’appareil au réseau à l’aide d’une
connexion sans fil ou d’une connexion LAN filaire.
To transfer a large volume of content to the unit
Using a LAN cable allows you to transfer quicker.
Connect a LAN cable first as shown in the illustration on
the right, and then turn on the power of the unit.
Pour transférer un volume important de contenu vers
l’appareil
Utilisez un câble LAN pour procéder plus rapidement au
transfert.
Connectez d’abord un câble LAN, comme illustré à droite,
puis mettez l’appareil sous tension.
A router/modem
Routeur/modem
ÒFÆ

Other manuals for Sony HAP-S1

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sony HAP-S1 and is the answer not in the manual?

Sony HAP-S1 Specifications

General IconGeneral
Product colorSilver
Audio formats supportedAAC, AIFF, ALAC, FLAC, LPCM, MP3, WAV, WMA
Impedance16 Ω
Frequency range10 - 100000 Hz
Audio output channels2.0 channels
Signal-to-Noise Ratio (SNR)100 dB
Channels quantity2 channels
Wi-FiYes
Wi-Fi standards802.11b, 802.11g, Wi-Fi 4 (802.11n)
Ethernet LAN data rates10, 100, 1000 Mbit/s
Automatic synchronizationYou don't have to change personal settings when first connecting your device. Your device is automatically synchronized with the settings of your car, so once you have done it for the car, that's it!
Storage media typeHDD
Total storage capacity500 GB
HDCPNo
Headphone outputs1
USB 2.0 ports quantity2
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity0
AC input voltage230 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Display diagonal4.3 \
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight- g

Related product manuals