RM-MC35ELK for
NW-HD5/NW-HD5H
Parts and Controls
Front
VOL (volume) +/–control
Adjusts the volume by turning the
VOL+/– control in the direction of the
arrow.
(stop) button
Press to stop or cancel the operation, and
press and hold to turn the player off.
Jog lever (, /ENT, )
Operation Function
Press /ENT.
Play/Pause/Enter
Press and hold
/ENT.
Add/remove* a bookmark
Move /ENT
toward .
Search/Go backwards
quickly.
Move /ENT
toward .
Search/Go forward
quickly.
* You cannot add a bookmark in stop mode.
Rear
+/– button
Finds the beginning of tracks in the
next/previous album, etc., selected on the
list display.
Display
Clip
HOLD switch
Slide the HOLD switch in the direction
of the arrow until the yellow mark
appears. Operations using the remote is
deactivated. Even if the HOLD function is
working, “HOLD” will not appear on the
display of the remote.
DISPLAY button
• The display changes, each time you
press the button as follows.
Track number, elapsed playing time
Track number, remaining time of the
track
Track number, track title
Track number, album title
Track number, artist name
Track number, playback mode
• The display lights up when you press
and hold the button.
Even if you set “Backlight” to “30 sec”
on the player, the display on the remote
lights up for 10 seconds.
• The characters A to Z, a to z, and 0 to 9
can be displayed.
P MODE/ (repeat) button
• The playback mode changes, each time
you press the button as follows.
Normal (Normal play)
1Track (Single play)
Track SHUF (Shuffle track play)
Item SHUF
(Shuffle items play)
• The repeat mode is set to “On” when
you press and hold the button.
SOUND button
The setting for the sound quality changes
as you press the button. Press and hold
it to customize the sound quality (
“Changing the Sound Quality and
Settings”* in the PDF of the Operating
Instructions).
* To select sound item, move the Jog lever.
You cannot use / on the player for this
operation.
Customizing sound quality
(6-Band Equalizer - Custom)
1 Press SOUND repeatedly to select
“Sound 1” or “Sound 2,” and then press
and hold it until the display changes.
2 Move the jog lever to select “Custom
1” or “Custom 2,” and then press the
jog lever.
“1” or “2” appears to the right of
SOUND.
3 Move the jog lever to select the
frequency range (flashing), and then
press +/– or turn the VOL+/–
control to select the sound level.
4 Repeat step 3 to make adjustments for
the remaining frequency ranges, and
then press the jog lever to enter the
setting.
Press to cancel set up.
Continued
© 2005 Sony Corporation
2-636-080-11(1)
RM-MC35ELK.GB.2-636-080-11(1)
To Next Page
Need help?
General
