SERVICE MANUAL
Revision History
Published by Sony Techno Create Corporation
Sony Corporation
LEVEL 3
HDR-CX630V/PJ630V/PJ650E/PJ650V/PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE_L3
Check the SERVICE NOTE (LEVEL 2) before the service.
983471411.pdf
Digital HD Video Camera Recorder
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
9-834-714-11
Ver. Date History Contents
S.M. Rev.
issued
1.0 2013.01 Official Release — —
2013A08-1
© 2013.01
MODEL GROUP
Projector Model: PJ630V/PJ650E/PJ650V/PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE
Non Projector Model: CX630V
GPS Model: CX630V/PJ630V/PJ650V/PJ650VE/PJ660V/PJ660VE
Non GPS Model: PJ650E/PJ660/PJ660E
EVF Model: PJ650E/PJ650V/PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE
Non EVF Model: CX630V/PJ630V
Ver. 1.0 2013.01
Photo: HDR-PJ650V
US Model
Canadian Model
AEP Model
North European Model
E Model
Hong Kong Model
Chinese Model
Korea Model
Tourist Model
Japanese Model
HDR-CX630V/PJ630V/PJ650E/PJ650V/
PJ650VE/PJ660/PJ660E/PJ660V/PJ660VE
Distinguishing MM-102 Boards (CX630V/PJ630V/PJ660/PJ660E/PJ660V/PJ660VE)
Three types of MM-102 board are used in this unit.
When repairing an MM-102 board, identify its type by the IC model names printed on the surface of IC8101 and IC8201 on the MM-102 board.
IC8101 IC8201
Type A No Mount SDIN5F1-64G-1029HT
Type B KLMBG4GE4A-A001T06 KLMBG4GE4A-A001T06
Type C KLMBG4WE4A-A001T01 KLMBG4WE4A-A001T01
Note (PJ660/PJ660E):
IC8101 and IC8201 cannot be replaced with any other type of IC. Be sure to replace them with the same type of IC.
When replacing Type B or Type C of IC8101 and IC8201, be sure to replace IC8101 and IC8201 together.
Note (CX630V/PJ630V/PJ660V/PJ660VE):
IC8101 and IC8201 of CX630V/PJ630V/PJ660V/PJ660VE are not supplied.
When IC8101 or IC8201 of CX630V/PJ630V/PJ660V/PJ660VE needs to be replaced, the board containing IC8101 or IC8201 must be replaced. In
this case, however, the MM-102 board to be replaced is always Type A.