For Windows 10
Click [Bluetooth].
3.
Select [HT-AX7].
If a passkey(*) is requested, enter “0000.”
If [HT-AX7] does not appear, perform the operation again from “Preparation: Setting the Speaker System to
Pairing Mode.”
4.
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
*
After pairing, it will automatically connect to the speaker system, and [Connected music] or [Connected
voice,music] will be displayed on the screen. Proceed to step
.
5.
Click the [Start] button, then [Settings].
1.
Click [Devices].
2.
To Next Page
Loading...
