Click the [Bluetooth & other devices] tab, click the [Bluetooth] switch to turn on the BLUETOOTH function, and
then click [Add Bluetooth or other device].
3.
Click [Bluetooth].
4.
Select [HT-AX7].
If a passkey(*) is requested, enter “0000.”
If [HT-AX7] does not appear, perform the operation again from “Preparation: Setting the Speaker System to
Pairing Mode.”
5.
The passkey may be called a “passcode,” “PIN code,” “PIN number,” or “password.”
*
After pairing, it will automatically connect to the speaker system, and [Connected music] or [Connected
voice,music] will be displayed on the screen. Proceed to step
.
6.
To Next Page
Loading...
