Sony HT-CT150 - Connecting the AC power cord (mains lead); Setting up the sound output of the connected component

Be%re connecting the AC power cord (mains lead) of the system to a wall outlet (mains), connect all
the other components and TV to the system.
• Alter connecting the AC power cord (mains lead), wait about 20 seconds bet_re turning on the power by pressing
• Connect the system to an easily accessible AC outlet (mains). Should you notice an abnormality in the system,
disconnect the main plug from the AC outlet (mains) immediately.
To enjoy sound in multi-channel format (DTS, Dolby Digital, multi-channel LPCM), you need to make
the audio output settings of the connected component. Set the connected component to output sound in
multi-channel format. For details on audio output settings, refer to the operating instructions supplied
with the connected component.
12 GB