o
Connecting
the
antenna
(aerial)
Connecting
the
AM
loop
antenna
(aerial)
The shape and the length
of
the antenna (aerial) is designed to receive
AM
signals. Do not dismantle
or roll up the antenna (aerial).
1 Remove only the loop part from the plastic stand.
2 Set up the
AM
loop antenna (aerial).
3 Connect the cords to the AM antenna (aerial) terminals.
While pushing down the terminal clamp, insert the (*) part
of
the cords.
The cords can be connected to either terminal.
Rear of the
----------
......
subwoofer
• Do not place the AM loop antenna (aerial) near the system or other AV component, as noise may result.
• Adjust the direction
of
the AM loop antenna (aerial) for best AM broadcast sound.
4 Make sure the AM loop antenna (aerial)
is
connected firmly by pulling softly on the cord.
To Next Page
