Sony HT-CT780 - Page 23

23
GB
Other Functions
2 Prepare screws (not supplied) that
are suitable for the holes in the
brackets.
3 Fasten the screws to 2 studs in the
wall.
The screws should protrude by
5 mm to 6 mm.
4 Hang the Bar Speaker on the
screws.
Align the holes in the brackets with
the screws, then hang the Bar
Speaker on the two screws.
4 mm
More than 30 mm
4.5 mm
Hole in the bracket
10 mm
777.5 mm (HT-CT380/CT381)
876 mm (HT-CT780)
5 mm to
6mm