2 Connecting with a TV
HDMI cable (not supplied)*
Optical digital cable
(supplied)
HDMI cable (not supplied)*
YES
NO
Is the HDMI input jack on your TV labeled “ARC” ?
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Playable Types of Files” in the Operating Instructions (separate document).
Note
•Make sure that the HDMI cable is firmly inserted.
3 Connecting with other devices
HDMI cable (not supplied)*
Blu-ray Disc™ player, cable
box or satellite box, etc.
* To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Playable Types of Files” in the Operating Instructions (separate document).
Disconnect the HDMI cable from the HDMI IN jack of the TV, then reconnect it to any of the HDMI IN jacks (HDMI IN 1/2/3) on the Bar Speaker.
To enjoy the high quality surround sound of Dolby TrueHD, DTS HD, etc., switch the connection of the Blu-ray Disc™ player, cable box, satellite box, etc. to the system.
Tip
•The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Set the settings as follows; Press HOME -
[Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
•To enjoy copy right-protected 4K content, refer to “Connection for Viewing Copyright-protected 4K Content” in the Operating Instructions (separate document).
Note
•Make sure that the HDMI cable is firmly inserted.
4 Setting up the remote control
1 Locating the installation position
Subwoofer
Bar Speaker
To mount the Bar Speaker on a wall
Refer to “Mounting the Unit on a Wall” in the Operating Instructions (separate document).
Note
•Do not place magnetic cards on the system or near the system.
•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
Sound Bar
Startup Guide
4-586-048-73(1)
HT-CT790
Supplied accessories
Remote control (1) R03 (size AAA) batteries (2) Optical digital cable (1)
Wall mounting brackets (2)
Screws (2)
Operating Instructions (1) Startup guide (this document) (1)
About the operation method of the system
Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen
of the system on the TV. Prepare the HDMI cable.
Refer to the Operating Instructions (separate
document) for the network settings, the NFC
function, and other functions.
Operating Instructions
Continued on back page
© 2016 Sony Corporation Printed in Malaysia
To Next Page
Need help?
General
Weight and Dimensions
