2 Connecting with a TV and other devices
Connect devices such as a Blu-ray Disc player, cable box, or satellite box to any of the HDMI IN jacks (HDMI1/2/3) on the Bar Speaker.
When devices such as a Blu-ray Disc player, cable box, or satellite box are currently connected to a TV, disconnect them from the TV and then connect them to the Bar Speaker to reproduce
the high quality surround sound of Dolby TrueHD, DTS-HD, DTS.
Connect a TV to the HDMI OUT jack on the Bar Speaker. If the TV is not compatible with ARC, also connect the TV to the TV IN OPTICAL jack on the Bar Speaker.
Tip
•The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Adjust the setting as follows: Press HOME -
[Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
•When your TV does not have both an OPTICAL OUT jack and an HDMI IN jack, refer to “Connecting a TV or Portable Audio Device via the ANALOG IN Jack” in the Operating Instructions (separate document) for a connection
method.
Note
•Make sure that the cables are firmly inserted.
•To watch 4K video content, refer to “Connecting a 4K TV and 4K Devices” in the Operating Instructions (separate document).
3 Setting up the remote control
HDMI cable
(not supplied)
: Video signals
: Audio signals
Blu-ray Disc™ player, cable
box or satellite box, etc.
HDMI cable
(not supplied)
HDMI cable
(not supplied)
Optical digital cable
(supplied)
: Video signals
: Audio signals
Blu-ray Disc player, cable
box or satellite box, etc.
HDMI cable
(not supplied)
YES
NO
Is the HDMI IN jack on your TV labeled “ARC” ?
1 Deciding the installation position
Subwoofer
Bar Speaker
To mount the Bar Speaker on a wall
Refer to “Mounting the Main Unit on a Wall” in the Operating Instructions (separate
document).
Note
•Do not place magnetic cards on the system or near the system.
•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
Sound Bar
Startup Guide
4-687-592-32(1)
HT-CT800
What’s in the box
Bar Speaker (1) Wall mounting bracket (2) Foot (2)
Screw (2) Subwoofer (1) Remote control (1)
R03 (size AAA) battery (2) Optical digital cable (1) WALL MOUNT TEMPLATE (1)
Operating Instructions Startup Guide (this document)
About the operation method of the system
Connect this system and the TV with the HDMI cable (not supplied) to display the operation screen
of the system on the TV. Prepare the HDMI cable.
Refer to the Operating Instructions
(separate document) for what you
can do with the system and the
network settings.
Continued on back page
© 2017 Sony Corporation Printed in Malaysia
To Next Page
Need help?
General
