Sony HT-DDW880 - Specifications

76
GB
C:\Documents and
Settings\pc13\Desktop\JC060000_2662263323DDW880_GB\2662263323\GB07REM_HT-
DDW880-CEL.fm
masterpage: Left
HT-DDW880
2-662-263-32 (3)
Specifications
Amplifier section
Power Output
1)
Models of area code CEL, CEK, SP, E51
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 90 W/ch
CENTER
2)
: 90 W
SUR
2)
: 90 W/ch
SUR BACK
2)
: 90 W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 135 W/ch
CENTER
2)
: 135 W
SUR
2)
: 135 W/ch
SUR BACK
2)
: 135 W
Models of area code AU
(6 ohms 120 Hz – 20 kHz, THD 0.09%)
FRONT
2)
: 70 W/ch
CENTER
2)
: 70 W
SUR
2)
: 70 W/ch
SUR BACK
2)
: 70 W
(6 ohms 1 kHz, THD 0.7%)
FRONT
2)
: 90 W/ch
CENTER
2)
: 90 W
SUR
2)
: 90 W/ch
SUR BACK
2)
: 90 W
(6 ohms 1 kHz, THD 10%)
FRONT
2)
: 135 W/ch
CENTER
2)
: 135 W
SUR
2)
: 135 W/ch
SUR BACK
2)
: 135 W
1)
Measured under the following conditions:
2)
Depending on the sound field settings and the
source, there may be no sound output.
Inputs (Analog)
Inputs (Digital)
Outputs (Analog)
Reproduction frequency range:
28 – 20,000 Hz
Tone
FM tuner section
Tuning range 87.5 - 108.0 MHz
Antenna FM wire antenna
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
Models of area code E51
With 10-kHz tuning scale:
530 – 1,610 kHz
3)
With 9-kHz tuning scale:
531 – 1,602 kHz
3)
Models of area code CEL, CEK, AU, SP
With 9-kHz tuning scale:
531 – 1,602 kHz
Antenna Loop antenna
Intermediate frequency
450 kHz
Area code Power requirements
CEL, CEK, SP 230 V AC, 50 Hz
E51, AU 240 V AC, 50 Hz
MULTI CH IN,
SA-CD/CD,
MD/TAPE, DVD,
VIDEO 1, 2, 3
Sensitivity: 800 mV
Impedance: 50 kohms
DVD (Coaxial) Sensitivity: –
Impedance: 75 ohms
VIDEO 1, 2
(Optical)
Sensitivity: –
Impedance: –
MD/TAPE (OUT),
VIDEO 1 (AUDIO
OUT)
Voltage: 800 mV
Impedance: 10 kohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kohm
Gain levels ±6 dB, 1 dB step
GB01COV_HT-DDW880-CEL.book Page 76 Friday, July 21, 2006 11:37 AM