2 Connecting with a TV and other devices
Connect devices such as a Blu-ray Disc player, cable box, or satellite box to any of the HDMI IN jacks (HDMI1/2/3) on the Bar Speaker.
When devices such as a Blu-ray Disc player, cable box, or satellite box are currently connected to a TV, disconnect them from the TV and then connect them to the Bar Speaker to reproduce
the high quality surround sound of Dolby TrueHD, DTS-HD, DTS.
To enjoy images in 4K/60p, usage of the Premium High Speed HDMI cable(s) with Ethernet is recommended. For details, refer to “Supported Input Video Formats” in the Operating
Instructions (separate document).
Connect a TV to the HDMI OUT jack on the Bar Speaker. If the TV is not compatible with ARC, also connect the TV to the TV IN OPTICAL jack on the Bar Speaker.
Tip
•The Standby Through function allows you to output HDMI signals to the TV even when the system is in standby mode.
Set the settings as follows; Press HOME -
[Setup] - [System Settings] - [HDMI Settings] - [Standby Through], then select [Auto] or [On].
•To enjoy copy right-protected 4K content, refer to “Connection for Viewing Copyright-protected 4K Content” in the Operating Instructions (separate document).
Note
•Make sure that the cables are firmly inserted.
3
Setting up the remote control
HDMI cable
(not supplied)
: Video signals
: Audio signals
Blu-ray Disc™ player, cable
box or satellite box, etc.
HDMI cable
(supplied)
YES
HDMI cable
(not supplied)
Optical digital cable
(not supplied)
: Video signals
: Audio signals
Blu-ray Disc player, cable
box or satellite box, etc.
HDMI cable
(supplied)
NO
Is the HDMI IN jack on your TV labeled “ARC” ?
1 Locating the installation position
Subwoofer
Bar Speaker
Note
•Do not place magnetic cards on the system or near the system.
•Do not place metal objects other than a TV around the system. Wireless functions may become unstable.
To mount the Bar Speaker on a wall
Refer to “Mounting the Unit on a Wall” in the Operating Instructions (separate document).
To attach the grille frame
Refer to “Attaching the Grille Frame” in the Operating Instructions (separate document).
Sound Bar
Startup Guide
4-585-894-14(1)
HT-NT5
Supplied accessories
Remote control (1) R03 (size AAA) batteries (2) HDMI cable (4K 60p 18Gbps
compatible) (1)
Wall mounting brackets (2)
Screws (2)
Grille frame support hook (2)
Grille frame (1)
Operating Instructions (1) Startup guide (this document) (1)
About the operation method of the system
Connect this system and the TV with the HDMI cable (supplied) to display the operation screen of
the system on the TV.
Refer to the Operating Instructions (separate
document) for the network settings, the NFC
function, and other functions.
Operating Instructions
Continued on back page
© 2016 Sony Corporation Printed in Malaysia
To Next Page
Need help?
General
