Sony HT-RT4 - Page 11

11
GB
Installing the system
1 Prepare screws (not supplied) that
are suitable for the holes at the
rear of the Bar Speaker or
Surround Speakers.
2 Fasten the screws in the wall.
The screw should protrude as
illustration.
For the Bar Speaker
For the Surround Speakers
3 Hang the Bar Speaker or Surround
Speakers on the screws.
Align the holes at the rear of the
speakers with the screws.
For the Bar Speaker
Hang the Bar Speaker on the two
screws.
For the Surround Speakers
Hang the Surround Speaker on the
two screws.
4 mm
More than 30 mm
5 mm
Hole at the rear of the speakers
9.5 mm
600 mm
6 mm to
7mm
8 mm to
10 mm
369.5 mm