To check the connection status of the BLUETOOTH function
Note
If the TV sound is not output from the speaker system, select the [Bluetooth] input on the remote control screen of the app. Check
the status of the front panel display and indicators on the bar speaker and take one of the following actions.
The BLUETOOTH indicator flashes twice repeatedly in blue and [PAIRING] appears in the front panel display: Perform pairing
on the TV.
[TV] appears in the front panel display: Perform steps from the start.
If pairing fails, try the following operations on the TV.
Accept pairing request.
If the maximum number of paired devices on the TV has been reached, remove any unneeded devices.
If the speaker system is reset, delete the pairing information of the speaker system from the TV and perform pairing again.
Hint
If there is no mobile device paired (ex. when using immediately after the purchase of the speaker system), the speaker system
goes into pairing mode when the input is simply changed to [Bluetooth].
Related Topic
Setting the Wireless Function to On or Off
Resetting the Speaker System
5-045-382-11(1) Copyright 2022 Sony Corporation
Status BLUETOOTH indicator
During pairing standby status Flashes twice repeatedly in blue
Connection is being attempted Flashes in blue
Connection has been established Lights in blue
To Next Page
Loading...
