To check the connection status of the BLUETOOTH function
Note
If pairing fails, try the following operations on the mobile device.
Accept pairing request.
If the maximum number of paired devices on the mobile device has been reached, remove any unneeded devices.
When the speaker system is reset, delete the pairing information of the speaker system from the mobile device and perform
pairing again.
Hint
If there is no mobile device paired (ex. when using immediately after the purchase of the speaker system), the speaker system
goes into pairing mode when the input is simply changed to [Bluetooth].
Perform pairing for a second or subsequent mobile devices.
Related Topic
Setting the Wireless Function to On or Off
Resetting the Speaker System
5-045-382-11(1) Copyright 2022 Sony Corporation
Start audio playback with the music app on the connected mobile device.7.
Adjust the volume.8.
Status BLUETOOTH indicator
During pairing standby status Flashes twice repeatedly in blue
Connection is being attempted Flashes in blue
Connection has been established Lights in blue
To Next Page
Loading...
