Help Guide
Sound Bar
HT-S2000
[System Settings]
These are the settings for the speaker system.
The following setting items appear by tapping [Settings] - [System Settings] on the remote control screen of the app.
[Auto Standby]
When you do not operate the speaker system while no signal is input for about 20 minutes, the speaker system enters
standby mode automatically.
[Network/Bluetooth Standby]
The speaker system turns on automatically when connected to a BLUETOOTH Classic device with a connection history.
You can also turn the speaker system on from the app.
[IR-Repeater]
The TV remote control signal received by the speaker system is transmitted from the back of the bar speaker to the TV.
[Dimmer]
You can change the brightness of the front panel display. The brightness of the indicators for the optional subwoofer and
rear speakers also changes.
[Using a USB drive to play music] (models with the
(USB) port only)
You can activate the USB playback function.
[System Information]
You can display the speaker system information such as the software version.
[Software License Information]
You can display the Software License Information.
5-045-382-11(1) Copyright 2022 Sony Corporation
To Next Page
Loading...
