Sony HVBK-1520 - Page 29

29
Overview
IMAGE ENHANCER
[> Image Enh]:
Adjust image
enhancer for up-
conversion and
cross-
conversion.
DETAIL GAIN [>>
Dtil Gain]:
Adjust the
degree of
sharpness of
edge
enhancement.
0 [>>> 0] to 40H [>>> 40H] to 7FH [>>>
7FH]
Factory default:
*40H
LIMITER [>>
Limiter]: Set
the maximum
level of added
detail.
0 [>>> 0] to 20H [>>> 20H] to 3FH [>>>
3FH]
Factory default:
*20H
CRISP TH [>>
Crisp TH]:
Adjust the
threshold
amplitude for
not enhancing
low amplitude.
0 [>>> 0] to 8H [>>> 8H] to FH [>>> FH]
Factory default:
*8H
LEVEL DEPEND
[>> Level
Dep]: Set the
luminance
range for edge
enhancement.
0 [>>> 0] to 8H [>>> 8H] to FH [>>> FH]
Factory default:
*8H
H DTIL FREQ [>> H
Dtl Frq]: Set
central
frequency for
edge
enhancement.
3.2MHz [>>> 3.2M]: 3.2MHz±1.1MHz
4.5MHz [>>> 4.5M]: 4.5MHz±1.4MHz
*5.0MHz [>>> 5.0M]: 5.0MHz±0.7MHz
4.0MHz [>>> 4.0M]: 4.0MHz±2.0MHz
H/V RATIO [>> H/V
Ratio]: Adjust
the horizontal/
vertical ratio for
edge
enhancement.
0 [>>> 0] to 03H [>>> 03H] to 7H [>>>
7H]
Factory default:
*03H
GAMMA LEVEL
[>> Gamma
Lvl]: Set the
gradient of the
gamma
correction
curve.
0 [>>> 0] to 08H [>>> 08H] to 10H [>>>
10H]
Factory default:
*08H
UP/CROSS CONVERTER [Up/Cross]:
Settings relating to the up-conversion/
cross-conversion function
Description of settings