Sony ICB-1000W - User Manual

1CB-1000W
TRANSCEIVER
GENERAL
Frequency:
Communication System:
Semiconductors:
Antenna:
Speaker:
Microphone:
Power Requirement:
Covering Distance:
Dimensions:
Weight:
SPECIFICATIONS
CH-A 27.085 MHz
CH-B 27.035 MHz ){E, USA model)
27.240 MHz (AUS model)
Push-to-talk system {one-way system)
11C, 1 FET, 14 transistors, 5 diodes
Telescopic antenna
1,445 mm (4 ft 9 in)
Permanent dynamic speaker
Semdia(2 dia),8Q
Dynamic microphone, 200 22
DC 12 V penlight battery size “AA’’ 8 pes
Car battery DC 12 V by using SONY
car battery cord DCC-6
AC 120 V 60 Hz {USA mode!), 110, 120, 220,
240 V 50/60 Hz (E, AUS mode!) by using
AC adaptor AC-12
In town 1 ~2 km, 0.5 ~1 miles
In the suberbs 6 ~8 km, 3.5 ~5 miles
Over water, flat and open place
80 ~ 160 km, 50 ~ 100 miles
66 iw) x 280 (h) x 86 (d) mm
25% (wh x 11 (h) x 3% {d) inches
1.3 kg, 2 [b 8 oz (including batteries)
TRANSMITTER SECTION
Circuit:
Frequency Tolerance:
Output Power:
Modulation:
Current Drain:
RECEIVER SECTION
Circuit:
Intermediate Frequency:
Maximum Sensitivity
at 50 mW output:
Signal-to-Noise Ratio:
Selectivity:
Maximum Power Output:
Current Drain:
Crystal controlled oscillator
+0.005 %
500 mw
Emitter modulation in oscillator
Simultaneous collector modulation
in buffer stage and final stage
109 mA at no dodulation
Superheterodyne using crystal
controlled local oscillator
455 kHz
—13 dB (0.22 LV)
44 dB (at 44 dB input)
57 dB at 27.085 MHz + 10 kHz
off-resonance
490 mW
15 mA at zero signal
7 mA at stand-by position
N'Y.
SERV
ICE MANUAL
54.

Sony ICB-1000W Specifications