IC Recorder
Quick Start Guide
4-448-097-11(1)
© 2013 Sony Corporation Printed in China
ICD-BX132
Welcome to your new Sony IC recorder!
This is the Quick Start Guide, which provides you with instructions on the basic operations of the IC recorder.
Please read it carefully. We hope you enjoy using your new Sony IC recorder.
Parts and controls
Built-in microphone
(headphone) jack
Operation indicator
Display window
FOLDER button
MENU button
à PLAY/ENTER button (*)
à (review/fast backward) button
Ą (stop) button
¯ (microphone) jack (PLUG IN POWER) (*)
VOL (volume) –/+ button (*)
DIVIDE button
ERASE button
Ć REC/PAUSE (record/pause) button
Ñ (cue/fast forward) button
Speaker
*1.&Ş219'4101((UYKVEJ
Battery compartment
Strap hole (A strap is not supplied.)
* These buttons and the jack have a tactile dot. Use it as a reference point for operations, or to identify each terminal.
GB
ES
Check the supplied items.
ˎ IC Recorder (1)
ˎ Quick Start Guide
ˎ LR03 (size AAA) alkaline batteries (2)
Let’s try out your new IC recorder
1. Power on.
Slide and lift the battery compartment lid, then insert
batteries with the correct polarity.
Turn the power on.
5NKFGCPFJQNFVJG*1.&Ş219'4101((UYKVEJKPVJGFKTGEVKQPQH
“POWER ON/OFF” until the window display appears.
6QVWTPVJGRQYGTQHHUNKFGCPFJQNFVJG*1.&Ş219'410
OFF switch in the direction of “POWER ON/OFF” until “OFF” is
displayed.
To prevent unintentional operations (HOLD)
2. Set the date and time.
When you insert batteries, “SET DATE” appears on the display, and
then the year section begins to flash.
Press à or Ñ to set the year (the last two digits of the
year), and then press àPLAY/ENTER. Repeat this procedure
to set month, day, hour, and minute in sequence.
3. Record.
Operation
indicator
Press ĆREC/PAUSE.
Recording starts and the operation indicator lights in red.
¼ You can pause recording by pressing ĆREC/PAUSE. Press ĆREC/
PAUSE again to restart recording.
Place the IC recorder so that the built-in microphone face the
direction of the source to be recorded.
Press Ą(stop) to stop recording.
“ACCESS” appears and the recording stops.
4. Listen.
Operation
indicator
Press àPLAY/ENTER.
Playback starts and the operation indicator lights in green.
Adjust the volume by pressing VOL –/+.
Press Ą(stop) to stop playback.
5. Erase.
When the IC recorder is in the stop mode, press and hold
ERASE.
When the IC recorder is in the playback mode, press ERASE.
“ERASE” is displayed.
Press ERASE.
To Next Page
Need help?
General
Weight and Dimensions
