Sony ICP-X1116 - GB

11
GB
01_GB_5-029-717-01(1)_210615-07_01-05
For the customers in the U.S.A.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause
harmful interference in which case the user will be
required to correct the interference at his own expense.
E-5_v002-000_5-029-717-01(1)_202106151322_GB_10/91
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
E-7_v002-000_5-029-717-01(1)_202106151322_GB_11/91
If you have any questions about this product, you may call:
Sony Customer Information Service Center 1-800-222-7669
or http://www.sony.com/
Supplier’s Declaration of Conformity
Trade Name : SONY
Model : ICP-X1116, ICP-X1124,
ICP-X1216, ICP-X1224
Responsible party : Sony Electronics Inc.
Address : 16535 Via Esprillo, San
Diego, CA 92127 U.S.A.
Telephone Number : 858-942-2230
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
E-10A_v004-000_5-029-717-01(1)_202106151322_GB_12/91
For the customers in Canada
CAN ICES-3 (A)/NMB-3(A)
E-12_v002-000_5-029-717-01(1)_202106151322_GB_13/91
For the customers in Europe
This apparatus shall not be used in the residential area.
E-36_v004-000_5-029-717-01(1)_202106151322_GB_14/91
AVERTISSEMENT
Afin de réduire les risques d’incendie ou
d’électrocution, ne pas exposer cet appareil à la pluie
ou à l’humidité.
Afin d’écarter tout risque d’électrocution, garder le
coffret fermé. Ne confier l’entretien de l’appareil qu’à un
personnel qualifié.
S-1_v008-000_5-029-717-01(1)_202106151322_FR_15/91
AVERTISSEMENT
Cet appareil ne possède pas d’interrupteur d’alimentation.
Lors de l’installation de l’appareil, incorporer un dispositif
de coupure dans le câblage fixe ou brancher la fiche
d’alimentation dans une prise murale facilement
accessible proche de l’appareil. En cas de problème lors
du fonctionnement de l’appareil, enclencher le dispositif
de coupure d’alimentation ou débrancher la fiche
d’alimentation.
S-5_v006-000_5-029-717-01(1)_202106151322_FR_16/91
AVERTISSEMENT : CET AVERTISSEMENT S’APPLIQUE AUX
ÉTATS-UNIS UNIQUEMENT.
En cas d’utilisation aux États-Unis, utilisez le cordon
d’alimentation RÉPERTORIÉ UL indiqué ci-dessous.
English
L-2_v008-000_5-029-717-01(1)_202106151322_GB_1/91
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
L-1_v003-000_5-029-717-01(1)_202106151322_GB_2/91
WARNING
To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer
servicing to qualified personnel only.
S-1_v008-000_5-029-717-01(1)_202106151322_GB_3/91
WARNING
This unit has no power switch.
When installing the unit, incorporate a readily accessible
disconnect device in the fixed wiring, or connect the
power plug to an easily accessible socket-outlet near the
unit. If a fault should occur during operation of the unit,
operate the disconnect device to switch the power supply
off, or disconnect the power plug.
S-5_v006-000_5-029-717-01(1)_202106151322_GB_4/91
WARNING:
THIS WARNING IS APPLICABLE FOR USA ONLY.
If used in USA, use the UL LISTED power cord specified
below.
DO NOT USE ANY OTHER POWER CORD.
Plug Cap
Parallel blade
(NEMA 1-15P Configuration)
Cord
Type NISPT-2, two 18 AWG
wires
Length
Minimum 1.5 m (4 ft 11 in),
Less than 4.5 m (14 ft 9 in)
Rating
Minimum 7 A, 125 V
Using this unit at a voltage other than 120V may require
the use of a different line cord or attachment plug, or both.
To reduce the risk of fire or electric shock, refer servicing to
qualified service personnel.
WARNING:
THIS WARNING IS APPLICABLE FOR OTHER
COUNTRIES/REGIONS.
1.
Use the approved Power Cord (2-core mains lead)
/ Appliance Connector / Plug that conforms to
the safety regulations of each country/region if
applicable.
2.
Use the Power Cord (2-core mains lead) / Appliance
Connector / Plug conforming to the proper ratings
(Voltage, Ampere).
If you have questions on the use of the above Power Cord
/ Appliance Connector / Plug, please consult a qualified
service personnel.
S-29E_v007-000_5-029-717-01(1)_202106151322_GB_5/91
WARNING
Operation of this equipment in a residential environment
could cause radio interference.
E-22H_v008-000_5-029-717-01(1)_202106151322_GB_6/91
CAUTION
For safety, do not connect the connector for peripheral
device wiring that might have excessive voltage to the
following ports:
- LAN A1
- LAN A2
- LAN B
S-28C_v007-000_5-029-717-01(1)_202106151322_GB_7/91
This equipment is not suitable for use in locations where
children are likely to be present.
S-76_v004-000_5-029-717-01(1)_202106151322_GB_8/91
All interface cables used to connect the equipment to
peripherals must be shielded type to comply with EMC
standard(s) and to prevent undesired operation due to
radiated emissions. When cables are supplied, always use
them for this purpose.
E-8_v013-000_5-029-717-01(1)_202106151322_GB_9/91
GB