Do not put the tip of a blower into the cavity beyond the lens mount area, so that the tip of the blower does not touch the image
sensor.
Hold the camera slightly face downward so that the dust falls out.
Do not subject the product to any shock during cleaning.
When cleaning the image sensor with a blower, do not blow too hard. If you blow the sensor too hard, the inside of the product
may be damaged.
If the dust remains even after you cleaned the product as described, consult the service facility.
Related Topic
Troubleshooting
4-747-614-13(1)
Copyright 2019 Sony Corporation
To Next Page
