When you set the focus to infinity in the manual focus mode or the direct manual focus mode, make sure that the focus is on a
sufficiently distant subject by checking the monitor or the viewfinder.
Note
[Automatic AF] is available only when you are using a lens that supports phase detection AF.
When [Continuous AF] or [Automatic AF] is set, the angle of view may change little by little while focusing. This does not affect
the actual recorded images.
Only [Continuous AF] and [Manual Focus] are available when shooting movies or when the mode dial is set to
.
Related Topic
Direct manual focus (DMF)
Manual Focus
MF Assist (still image)
Phase detection AF
4-747-614-13(1)
Copyright 2019 Sony Corporation
To Next Page
