Note
If the subject is closer than the minimum shooting distance of the lens, the
focus cannot be confirmed. Make sure you put enough distance between the
subject and the product.
[87] How to Use Using shooting functions Adjusting the focus
AF System (still image)
Sets the focus detection system (Phase Detection AF/Contrast AF) when you
attach an A-mount lens using an LA-EA1/LA-EA3 Mount Adaptor (sold
separately).
1. MENU → (Custom Settings) → [ AF System] → desired setting.
Menu item details
Phase Detection AF:
Focuses with Phase Detection AF. The focusing speed is faster than in [Contrast
AF] mode, but focusing is limited to within the phase detection focus area.
Contrast AF:
Always focuses with Contrast AF. You can focus anywhere on the monitor, but the
focusing speed is slower than in [Phase Detection AF] mode.
Note
When [ AF System] is set to [Contrast AF], (Continuous AF) under
[Focus Mode] is unavailable.
To Next Page
Loading...
