To Next PageTo Next Page
Need help?Do you have a question about the Sony ILCE-7SM2 and is the answer not in the manual?
General| Brand | Sony |
|---|---|
| Model | ILCE-7SM2 |
| Category | Digital Camera |
| Language | English |
Important precautions for replacing the SY-1063 board.
Guidelines for replacing EVF display (LCD902) or SY-1063 board.
Procedure to verify the Wi-Fi functionality.
Precautions for replacing the SY-1063 board in Japanese.
Details on camera system, image sensor, and stabilization.
Technical details of the image sensor and stabilization system.
Information on autofocus system and electronic viewfinder.
Details on exposure control methods and shutter speed ranges.
Guidelines for managing volatile chemicals safely.
Handling plastic parts during service and cleaning.
Steps to verify safety after completing repairs.
Warning about potential explosion if battery is replaced incorrectly.
Procedures for writing destination data and inputting IDs after board replacement.
How to write adjustment values for EVF display or SY board.
Steps to confirm the unit is detected as a connectable wireless network.
Instructions for removing MB N Plate A and MB N Plate SP.
Attaching MB N SP (755) and MB N Pin (H) correctly.
Procedures for destination data and ID input in Japanese.
How to write adjustment values for EVF/SY board in Japanese.
Confirming Wi-Fi connectivity on a PC in Japanese.
Detaching MB N Holder B and MB N Pin H in Japanese.
Guide to identify and locate various camera components.
Catalog of parts available for repair.
Precautions for handling flexible boards, avoiding contamination and damage.
Proper methods for connecting and disconnecting flexible board connectors.
Information on subsidiary materials like grease.
Visual breakdown of the rear section components.
Steps for disassembling the LC FPC Cap T ASSY.
List of parts for the rear section-2.
Disassembly steps involving #1 X 1 screws.
List of parts for the main board section.
Disassembly steps involving #309 X 1 screws.
List of parts for the mecha device section.
Disassembly steps involving #1 X 1 screws.
List of parts for the MB N frame section.
Disassembly steps involving #234 X 4 screws.
List of parts for the imager unit section.
Disassembly steps involving #191 screws.
List of parts for the top cabinet section.
Disassembly steps involving #2 X 4 screws.
List of parts for the grip cover section.
Details on the #308 screw used in the grip cover section.
List of parts for the LCD section.
Details on the #196 screw used in the LCD section.
List of AC adapters and battery chargers.
List of power cords and connecting cables.
List of available instruction manuals.
Sequence for tightening screws when assembling the imager unit.
Method for attaching the MB Mask Sheet (5000).
Guidance on applying grease to the MB N Plate SP.
Procedure for cleaning the tip of the CCD cleaning jig.
Steps for cleaning the OLPF using the CCD cleaning jig.
Procedures for removing stubborn dirt from the OLPF.
