Multi (default setting):
Measures light on each area after dividing the total area into multiple areas and
determines the proper exposure of the entire screen (Multi-pattern metering).
Center:
Measures the average brightness of the entire screen, while emphasizing the
central area of the screen (Center-weighted metering).
Spot:
Measures only the central area (Spot metering). This function is useful when the
subject is backlit or when there is strong contrast between the subject and the
background.
Note
[Multi] is selected when using the following functions:
[Intelligent Auto]
[Superior Auto]
[Scene Selection]
Zoom functions other than optical zoom
[91] How to Use
Using shooting functions Adjusting the exposure
AE lock
When the contrast between the subject and background is high, such as when
shooting a backlit subject or a subject near a window, meter the light at a spot
where the subject appears to have the appropriate brightness and lock the
exposure before shooting. To reduce the brightness of the subject, meter the light
at a spot brighter than the subject and lock the exposure of the entire screen. To
make the subject brighter, meter the light at a spot darker than the subject and
lock the exposure of the entire screen.
1. Adjust the focus on the spot at which the exposure is adjusted.
2. Switch the AF/MF/AEL switch lever to the AEL position, then press the AEL
button.
To Next Page
