Cine4: Strengthens the contrast in dark parts more than [Cine3]. The contrast in
dark parts is lower and the contrast in bright parts is higher than for [Movie].
ITU709: Gamma curve that corresponds to ITU709.
ITU709(800%): Gamma curve for confirming scenes on the assumption of
shooting using [S-Log2].
S-Log2: Gamma curve for [S-Log2]. This setting is based on the assumption that
the picture will be processed after shooting.
Black Gamma
Corrects gamma in low intensity areas.
Range: Selects the correcting range. (Wide / Middle / Narrow)
Level: Sets the correcting level. (-7 (maximum black compression) to +7
(maximum black stretch))
Knee
Sets knee point and slope for video signal compression to prevent over-exposure
by limiting signals in high intensity areas of the subject to the dynamic range of
your camera.
When selecting [Still], [Cine1], [Cine2], [Cine3], [Cine4], [ITU709(800%)], [S-Log2]
in [Gamma], [Knee] is set to [Off] if [Mode] is set to [Auto]. To use functions in
[Knee], set [Mode] to [Manual].
Mode: Selects auto/manual settings.
Auto: The knee point and slope are set automatically.
Manual: The knee point and slope are set manually.
Auto Set: Settings when[Auto] is selected.
Max Point: Sets the maximum point of the knee point. (90% to 100%)
Sensitivity: Sets the sensitivity. (High/Mid/Low)
Manual Set: Settings when [Manual] is selected.
Point: Sets the knee point. (75% to 105%)
Slope: Sets the knee slope. (-5 (gentle) to +5 (steep)
Color Mode
Sets type and level of colors.
Movie: Suitable colors when [Gamma] is set to [Movie].
To Next Page
Loading...
