Examples of functions that can only be assigned with custom keys
Focus Standard:
Depending on the options selected in [Focus Area] or [Center Lock-on AF], the
available functions varies when pressing the key.
When you press the key while the [Focus Area] is set to [Zone] or [Flexible
Spot], you can change the position of the focus range finder frame. You can
shoot still images while changing the position of the focus range finder frame.
When you press the key when the [Focus Area] is set to [Wide] or [Center] and
[Center Lock-on AF] is [On], [Center Lock-on AF] will activate.
The camera will automatically focus while pressing the key when the [Focus
Area] is [Wide] or [Center], [Focus Mode] is set to other than [Manual Focus],
and [Center Lock-on AF] is set to [Off].
Note
Some functions cannot be assigned to certain keys.
[133] How to Use Using shooting functions Customizing the shooting functions for
convenient use
Function of the control wheel
Once you assign a function to the control wheel, you can perform that function by
simply turning the wheel when the shooting information screen is displayed.
1. MENU → (Custom Settings) → [Custom Key Settings] → [Control Wheel]
→ desired setting.
The functions that can be assigned are displayed on the setup item selection
screen.
[134] How to Use Using shooting functions Customizing the shooting functions for
convenient use
Function of the focus hold button
To Next Page
Loading...
