[5] How to Use Before Use Names of parts
Identifying parts (Bottom view)
1. Battery insertion slot
2. Battery cover
3. Tripod socket hole
Use a tripod with a screw less than 5.5 mm (7/32 inches) long. Otherwise,
you cannot firmly secure the camera, and damage to the camera may
occur.
4. Battery cover locking button
5. Battery cover release lever
Connection plate cover
Use this when using an AC-PW20 AC Adaptor (sold separately). Insert the
connection plate into the battery compartment, and then pass the cord through the
connection plate cover as shown below.
Make sure that the cord is not pinched when you close the cover.
[6] How to Use Before Use Names of parts
To Next Page
Loading...
