You cannot turn on the product.
After inserting the battery pack into the product, it may take a few moments for
the product to power up.
Make sure that the battery pack is inserted correctly.
The battery pack will discharge by itself even if you do not use it. Charge the
battery pack before use.
Make sure that the battery is NP-FW50.
[290] Troubleshooting Troubleshooting Battery pack and power
The power turns off suddenly.
Depending on the product and battery pack temperature, the product may turn
off automatically to protect itself. In this case, a message is displayed on the
product screen before the product turns off.
[291] Troubleshooting Troubleshooting Battery pack and power
The battery pack discharges quickly.
When [Remote Ctrl] has been set to [On], the power save mode will not
function. Set [Remote Ctrl] to [Off] after using with a remote control.
[292] Troubleshooting Troubleshooting Battery pack and power
The remaining battery level indicator shows an incorrect
level.
This phenomenon occurs when you use the product in an extremely hot or cold
location.
To Next Page
Loading...
