Turning the Smart Imaging Stand on and off
To turn on the Smart Imaging Stand
•
Slide the power switch to the ON position.
To turn off the Smart Imaging Stand
•
Slide the power switch to the OFF position.
Resetting the Smart Imaging Stand
Reset the Smart Imaging Stand if it behaves unexpectedly. When you reset the
device, all information about paired phones gets deleted.
To reset the Smart Imaging Stand
1
Make sure the Smart Imaging Stand is turned off.
2
Remove the batteries and then re-insert them.
6
This is an Internet version of this publication. © Print only for private use.
To Next Page
Loading...
