[124] Troubleshooting | Picture (quality)/screen
The screen becomes darker after a certain period
of time. (only models equipped with an OLED
panel)
If the whole image or part of the image remains still, the screen will gradually become
darker to reduce image retention. This is a feature to protect the panel, and is not a
malfunction.
[125] Troubleshooting | Picture (quality)/screen
The message [Panel refresh did not finish] is
displayed. (only models equipped with an OLED
panel)
Panel refresh automatically runs after the TV has been used for a long period of time to
reduce image retention. If the TV is turned on, the AC power cord (mains lead) is
unplugged, or the ambient temperature falls outside of the range between 10°C and 40°C
during the panel refresh, the process will not complete and this message will appear.
If panel refresh started automatically, it will restart when you turn off the TV with the
remote control.
If panel refresh was initiated manually, you must select it again.
[126] Troubleshooting | Picture (quality)/screen
You are concerned about an image retention. (only
models equipped with an OLED panel)
If the same image is displayed repeatedly or for long periods of time, image retention may
occur.
To reduce image retention, we recommend that you turn off the TV normally by pressing
the power button on the remote control or TV.
Note
Manually perform panel refresh only when image retention is particularly noticeable.
As a reference, perform it only once a year. Avoid performing it more than once a
To Next Page