1
2
3
1
2
3
Turn the Bluetooth device on and put it in pairing mode.
To put your Bluetooth device in pairing mode, refer to the instruction manual
of the device.
Press the HOME button, then select [Settings] — [Remotes & Accessories] —
[Bluetooth settings] — [Add device] to put the TV in pairing mode.
A list of available Bluetooth devices will be displayed.
Select the desired device from the list, then follow the on-screen
instructions.
If you are prompted to enter a passcode, refer to the instruction manual of
the device.
After pairing is completed, the device connects to the TV.
To connect to a paired Bluetooth device
Press the HOME button, then select [Settings] — [Remotes & Accessories] —
[Bluetooth settings].
Select a paired but unconnected device from the list.
Select [Connect].
Related topics
Supported Bluetooth profiles
Operation cuts out, or a device does not work.
You want to output sound from both the headphones/Bluetooth audio device/audio
system and the TV speakers.
[74] Using the TV with Other Devices | Bluetooth devices
Adjusting the AV sync setting
If a Bluetooth audio device is connected, there may be a delay between the picture and
sound due to the properties of Bluetooth. You can adjust the delay between the picture
and sound with the A/V sync setting. (Only for Bluetooth A2DP-supported models that can
use Bluetooth audio devices.)
To Next Page
Loading...
